Handleiding
Je bekijkt pagina 10 van 16
OPERATION
Plug in the unit and switch on the main power switch. The power indicator will light up.
Press the Power button (4) to turn the unit on. The current room temperature will be
displayed.
HEAT SETTINGS
Press the Heat Setting button (5) to set the heat level to either low or high.
SETTING THE TEMPERATURE
Press the Up (2) or Down (3) buttons to increase or decrease the temperature. If no
buttons are pressed for 3 seconds, the heater will run to the previously set
temperature.
As the thermostat is inside the heater, it is recommended to set the thermostat to the
highest setting and once the room is at a temperature you are comfortable with, then
set the thermostat to that temperature.
SETTING THE TIMER
Press the Timer button (6) to set timer. The set time is displayed. Press the Timer
button to increase the timer in one hour increments. The timer has a range of 0-24
hours. The unit will turn off once the timer completes its countdown.
CHILD SAFETY LOCK
Press and hold the Child Lock button for 3 seconds to lock the system. A will be
displayed. To unlock, either turn the unit off or press and hold the Child Lock button
for 3 seconds.
TURN OFF
Press and hold the Power button (4) to turn off the unit. The power indicator light will
remain lit while the main power switch is in the On position.
Operating your Appliance
1
5
6
8
2
3
7
4
1 – Display
2 – Up Button
3 – Down Button
4 – Power Button
5 – Heat Setting Button
6 – Timer Button
7 – Receiver
8 – Child Lock Button
Bekijk gratis de handleiding van GoldAir Platinum GPPH220, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | GoldAir |
| Model | Platinum GPPH220 |
| Categorie | Heater |
| Taal | Nederlands |
| Grootte | 2087 MB |
