Handleiding
Je bekijkt pagina 4 van 8
Carefully turn the heater upside-down on a
non-scratching and stable surface to
prevent damage to the paint finish or your
floor surfacing (Figure 1).
Fit the wheel castors onto the heater by
placing the U-shaped bolt between the
outermost fin away from the control side of
the heater (Figure 2, 3).
Securely fasten the wheel castors to the
heater by screwing the wing nuts onto the
U-bolts (Figure 4).
Attach the second wheel castor at the
bottom of the control panel, then securely
fasten the wheel castor onto the heater with
the two screws (Figure 5).
IMPORTANT: Please fit the wheel
assemblies as per the diagram. Any other
position may affect the stability of the
heater.
WARNING: Operate the heater in normal
upright position only, with wheel assemblies
attached to the bottom, any other position
could create a hazardous situation.
Main Body x1
Wing Nut x 4
Wheel Castor x2
Assembly
U-shape Bolt x 2
Bekijk gratis de handleiding van GoldAir GOC2111, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | GoldAir |
| Model | GOC2111 |
| Categorie | Heater |
| Taal | Nederlands |
| Grootte | 2094 MB |
