GLP MAD MAXX handleiding

32 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 25 van 32
German Light Products GLP MAD MAXX
Rev. 20250625-1 25
Do not use solvents, abrasives or any other aggressive product to clean the fixture.
Do not use a compressed air jet to remove dust and loose particles from surfaces
and air vents instead use a vacuum cleaner and soft brush. Prevent the blades of
cooling fans from turning before you aim a vacuum at them, or you may spin the
fan too fast and damage it.
Do not let optical components come into contact with oil or grease. Put on clean,
dry lint-free gloves before you touch them.
Clean glass components by wiping gently with alcohol wipes or a soft, clean, lint-
free cloth moistened with a weak detergent solution. Put the solution on the
cloth, not on the surface to be cleaned. Avoid rubbing glass surfaces. If particles
are stuck to the glass, try to lift them off by dabbing them repeatedly with a
cotton swab or moistened lint-free cloth.
Dry the fixture with a soft, clean, lint-free cloth or low-pressure compressed air
before reapplying power.
Seal maintenance and vacuum testing
The GLP MAD MAXX is an IP65-rated fixture. It leaves the factory having passed
vacuum tests. Depending on how and in what conditions the product is used, seals
will age over time. Seals must be considered as parts that are subject to wear and
tear. They must be checked regularly and replaced if necessary. Regular vacuum
testing and seal maintenance is necessary to maintain the fixture’s IP65 rating in the
long term. A leak caused by seal aging or by not carrying out regular leak tests is not
grounds for a warranty claim. Please contact GLP Service for guidance with vacuum
testing.
Suggested maintenance intervals
We suggest the maintenance schedule below, but bear in mind that cleaning
intervals depend on the operating environment. Our suggested cleaning intervals
are based on our experience with typical installations check the fixture to assess the
need for cleaning and adjust intervals as necessary.
Maintenance Task
Environment
Interval
How
Clean front lens, fixture
housing.
Clean fans, clean or
replace air filter.
High levels of
airborne
contaminants
(club, bar,
touring, concert
etc.)
After each job
Use soft, lint-free cloth
moistened with weak
detergent solution
Low levels of
airborne
contaminants
Monthly

Bekijk gratis de handleiding van GLP MAD MAXX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkGLP
ModelMAD MAXX
CategorieVerlichting
TaalNederlands
Grootte4369 MB