GLP impression X5 IP handleiding
Handleiding
Je bekijkt pagina 34 van 41
www.glp.de X5 IP
34 impression X5 IP User Manual
Main menu
The following menus and commands are available in the impression X5 IP control
panel.
Menus
Notes
DMX Address
001-512
Set fixture’s DMX start address.
Highest address possible
depends on control mode.
Control Mode
M1 Basic
Set fixture’s DMX control mode.
M2 Normal
M3 Segment
M4 Multipix Advanced
M5 Multipix Compressed RGB
M6 Multipix Compressed RGBL
Protocol Setup
Data In
DMX
Control via DMX, Art-Net or
sACN Protocol, control via GLP
iQ.Mesh protocol, control via
LumenRadio CRMX (when
CRMX module is installed in
fixture’s FPO port).
Art-Net
sACN
iQ.Mesh
CRMX (FPO)
Ethernet
config
Addressing mode
Auto 2.x.x.x
Auto Addressing in the range
2.x.x.x
Auto 10.x.x.x
Auto Addressing in the range
10.x.x.x
DHCP
Get IP address by DHCP
Custom IP
Use custom IP address
Custom IP address
000.000.000.000
Enter custom IP address
Custom IP subnet
000.000.000.000
Enter custom subnet IP
address
ArtNet port
0 … 32768
Enter Art-Net port
sACN universe
1 ... 63999
Enter sACN universe
Linking
options
iQ.Mesh Unlink
Unlink from GLP iQ.Mesh link
CRMX (FPO) Unlink
Unlink from CRMX
(only available if CRMX module
is installed at fixture’s FPO port)
Bekijk gratis de handleiding van GLP impression X5 IP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | GLP |
| Model | impression X5 IP |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 4489 MB |
