GLP impression X5 Bar 1000 handleiding
Handleiding
Je bekijkt pagina 38 van 84
www.glp.de X5 Bar 1000
38 impression X5 Bar 1000 User Manual
8. Error messages
When restarting the fixture or sending a RESET command, the fixture performs an
initialization process to test all functions and sensors. The fixture also continuously
checks itself for correct operation.
If an error is detected, the fixture display shows the message ERROR.
● Pressing ignores the error message and exits the error display.
● Pressing shows information about the error.
Note: Make a note of any error message displayed. You may need these details for
error diagnosis. Please be ready to give them to GLP Service if necessary.
Certain critical error messages are permanently stored in the display. In this case,
please contact your GLP service agent.
9. Pixel layout
The impression X5 Bar 1000 pixels are located as shown above, seen from the front of
the fixture with tilt at >50% and Pixel mirror → y-mirror set to Off.
You can mirror the pixels over the y axis (inverting the order of the pixels so that they
run from pixel 18 on the left to pixel 1 on the right in the illustration above) if you set
Pixel mirror to y-mirror in the Fixture Settings options available in the fixture’s control
panel, on the Control/Settings DMX channel or via RDM.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
Bekijk gratis de handleiding van GLP impression X5 Bar 1000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | GLP |
| Model | impression X5 Bar 1000 |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 13540 MB |
