GLP impression X4 Bar 10 handleiding
Handleiding
Je bekijkt pagina 7 van 30
GLP German Light Products GmbH
impression X4 BAR 10 manual (v1.8) from software version: v0.60 7
3.1.1 Operating on the Floor (Upright)
The
IMPRESSION X4 Bar 10
is fitted with 4x solid rubber feet which allows a stable
standing of the fixture. An additional securing is usually not required. Please pay
attention to an even and gripping surface.
3.1.2 Mounting in hanging or sideways position
To operate the IMPRESSION X4 Bar 10 in a hanging position please use the
dedicated bracket supplied with your fixture. It is fixed to the base of the fixture with
fasteners called Camlock quick-release connectors. Insert the four fasteners and
turn each 90° to lock them. Do the opposite to release them again.
3.2 Securing the Fixture
Regardless of the mounting method of the IMPRESSION X4 Bar 10 you'll have to
use a stipulated safety wire.
Attach the safety wire through the attachment point shown below and connect it to
the primary support structure.
The safety attachment point can be deployed by simply swinging it out from the
base.
Pay attention to a safe and proper fastening. The safety cable must comply with
BGI 810-3 (EN 60598-2-17 Section 17.6.6) and be capable of bearing a static
suspended load that is ten times the weight of the fixture and all installed
accessories.
4 x Camlock for bracket
Bekijk gratis de handleiding van GLP impression X4 Bar 10, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | GLP |
| Model | impression X4 Bar 10 |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 4352 MB |
