GLP impression S350 handleiding
Handleiding
Je bekijkt pagina 23 van 48
German Light Products®
GLP impression S350 User Manual Rev. C 23
If you need to install a Neutrik powerCON TRUE1 connector on a power cable, follow
the instructions given in the Support area of the Neutrik website at www.neutrik.com.
Respect the color coding used in the supplied power cable and in your local mains
power wiring system. US and EU systems use the color coding shown below:
Live or L Neutral or N
Ground / Earth or
US system Black White Green
EU system Brown Blue Yellow/green
Main fuse
See Figure 12. The main fuse sits in a holder in the
base.
If the fixture appears to be completely shut down
even though power is applied, the main fuse may
have blown. Disconnect the fixture from power
before replacing the fuse. You can open the
fuseholder with a flat-headed screwdriver. Replace
only with a fuse of the same type and rating.
If the fuse blows repeatedly, disconnect the fixture
from power and contact GLP for service and
repair.
Setting up fixture control
The impression S350 can be controlled via USITT512 DMX over a standard DMX cable
link, Art-Net network or sACN network.
If you would like any advice with planning and installing a suitable control link, your
GLP supplier will be happy to provide assistance.
DMX
The fixture has 5-pin and 3-pin XLR IN and THRU sockets for connection to a DMX cable
data link. Use certified DMX cable only for this link.
Connectors use standard DMX pinout:
• Pin 1 = Ground
• Pin 2 = Negative / data cold
• Pin 3 = Positive / data hot.
• Pins 4 and 5 are not used.
Figure 12. Main fuse
Bekijk gratis de handleiding van GLP impression S350, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | GLP |
| Model | impression S350 |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 5493 MB |
