GLP impression FR1 handleiding
Handleiding
Je bekijkt pagina 29 van 36
German Light Products®
Impression® FR1 User Manual 29
Figure 9. Removing a micro-Fresnel lens
See Figure 9. Remove the three Phillips #1 screws (arrowed) from the lens in the
front of the head.
Tilt the head downwards and allow the lens A and frost
filter B to slide out of the head. Store the lens for possible
re-use.
Reinstall the frost filter in the head by passing the three
screws through the notches in the filter and tightening
them into their holes in the head.
If you reinstall the micro-Fresnel lens later, use the three
Phillips screws to fasten it into its original position over the
frost filter. See Figure 10. The smooth side of the lens must
face inwards and the ridges must face out of the head.
GLP Service and Support
Contact information for the nearest GLP Service and Support is available online at
www.glp.de/en/service, by request via email at info@glp.de, or by telephone at the
following numbers:
GLP Germany: +49 (7248) 927 1955
GLP N. America: +1 818 767-8899
GLP U.K.: +44 1392 690140
GLP Asia: +852 (3151) 7730
GLP Nordic: +46 737 57 11 40
Figure 10. Lens
orientation
Bekijk gratis de handleiding van GLP impression FR1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | GLP |
| Model | impression FR1 |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 4168 MB |
