GLP impression FR10 Bar handleiding
Handleiding
Je bekijkt pagina 19 van 72
German Light Products®
impression FR10 Bar User Manual Rev. 20220727-1 19
Tilt disable
Disables/enables Tilt movement. Disabling Tilt movement can be useful if the fixture is
installed in a location where there is not enough space for tilt movement, for example.
Three settings are available:
• OFF (the default setting) – Gives normal Tilt control.
• Reset disabled – Prevents the Tilt function from resetting if you send a Reset
command, but Tilt can still be controlled via DMX. The Tilt motor is energized so that
the head stays in position.
• Current disabled – Disconnects the Tilt function completely from power and from
DMX control. The Tilt motor will not hold the head in position.
Note: If you change from one setting to the other, the fixture will carry out a Tilt reset to
initialize Tilt position.
Zoom Invert
Lets you invert the Zoom effect:
• At the default setting (Zoom Invert = OFF), increasing values on the Zoom channel
moves the zoom from narrow to wide.
• If invert is enabled (Zoom Invert = ON), increasing values on the Zoom channel
moves the zoom from wide to narrow.
No Signal
Determines what the fixture does if no DMX signal is present (if the fixture is being
controlled by DMX but the DMX signal stops, or if you apply power to the fixture when
no DMX signal is present):
• Blackout – Sets the fixture to black out whenever it is not receiving a DMX signal.
• Hold (the default setting) – Sets the fixture to continue obeying the last DMX values
it received.
• Stand-Alone – Sets the fixture to play its stored stand-alone scene (see CAPTURE
DMX SCENE) when the fixture is not receiving a DMX signal. If no stand-alone scene
is stored in memory, the fixture will black out.
Note: This setting is useful if you want fixtures to automatically start stand-alone
operation when you apply power to them.
• Capture DMX Scene – Takes a snapshot of the DMX values that the fixture is
currently receiving and stores them in the fixture’s memory as its stand-alone scene.
Once captured, the fixture will display this stand-alone scene if it is set to STAND-
ALONE and is not receiving a DMX signal.
Dimmer Curve
Selects one of the two dimming curves available:
• Linear – Light intensity appears to increase and decrease evenly throughout the
dimming range.
Bekijk gratis de handleiding van GLP impression FR10 Bar, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | GLP |
| Model | impression FR10 Bar |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 11911 MB |
