GLP HIGHLANDER Wash handleiding
Handleiding
Je bekijkt pagina 6 van 27
www.glp.de
6 Highlander Wash
User Manual
Features
Intended use
The Highlander Wash is for permanent or temporary indoor use in venues where the
distance to illuminated surfaces is at least 8 m / 26.3 ft.). It may be used outdoors if it is
protected from moisture and precautions are taken to prevent damage from direct
sunlight. It may be placed upright on a level surface or suspended from a suitable
structure as described in this manual.
The Highlander Wash is not suitable for household use, wherever unattended children
have access to it, for permanent outdoor installation, or in areas where the distance
from the fixture to illuminated surfaces is less than the minimum specified.
The Highlander Wash must be installed, operated, and maintained only by persons with
the training, knowledge and skills to do so safely.
Lamp
The Highlander Wash has an OSRAM Lok-It! 1400/PS Brilliant 1400 watt short-arc
discharge lamp with a CRI of 95. This lamp gives true-to-life color and very attractive skin
tones, making it ideal for theatre settings. The lamp’s average rated life is 750 hours. To
minimize the risk of lamp explosion and obtain the best light output, replace the lamp
before it reaches its rated lifetime following the directions in the fixture’s Quick Start and
Safety Manual supplied with the fixture and available for download from www.glp.de.
The fixture will not allow a lamp restrike if it senses that the lamp is too hot. If hot restrike
protection is active, the message HOT appears in the fixture display.
If you have had lamp power applied and then powered the lamp off, allow the lamp to
cool with the fixture powered on until the HOT message disappears from the display
before restriking it. Allow the fixture to cool with power applied for 30 minutes before
opening the lamp door or any other part of the housing.
Lamp power
The lamp can be operated at two power levels:
● At the NORMAL power setting, the lamp runs at 1400 W
● At the ECO power setting, the lamp runs at 1000 W.
You can toggle between these two settings under Lamp Power in the Fixture Settings
control menu.
See the Highlander Wash Quick Start and Safety Manual for details of the lamp power
available when the fixture is connected to AC mains power below 200 V.
Control options
The Highlander Wash is compatible with DMX 512, RDM, Art-Net and sACN control
protocols. See the Highlander Wash Quick Start and Safety Manual for more details.
You can also control the Highlander Wash via wireless DMX if you install an optional
CRMX module. Contact your GLP supplier for details.
Bekijk gratis de handleiding van GLP HIGHLANDER Wash, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | GLP |
| Model | HIGHLANDER Wash |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 3194 MB |
