GLP Fusion X-Par 12Z handleiding
Handleiding
Je bekijkt pagina 21 van 55
German Light Products® Connecting to DMX data
Fusion XPAR 12Z User Manual Rev. A 21
6. Connecting to DMX data
Check that all cables and connectors are suitable for the installation environment and
application (see recommendations in ‘Avoiding damage to the fixture’ on page 10).
Use
digital 110 Ohm DMX cable with IP65 5-pin XLR connectors to supply DMX data to
fixtures.
Keep connectors sealed with their rubber caps at all times when not in use.
The XPAR 12Z has two 5-pin XLR connectors for IN and THRU connections to a DMX data
link. XPAR 12Z fixtures support the USITT DMX 512A signal protocol. They also support RDM
(Remote Device Management).
The 5-pin XLR connectors use standard pin allocations:
1 Signal Ground
2 Data –
3 Data +
4 Not used
5 Not used
If you would like advice with planning and installing a DMX link, your GLP supplier will be
happy to provide assistance.
Installing optional barndoors
An optional barndoor accessory is available for the XPAR 12Z that can be installed on the
front of the fixture to control lateral light spill if required.
1
2
Figure 7. XPAR 12Z with Barndoors
Bekijk gratis de handleiding van GLP Fusion X-Par 12Z, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | GLP |
| Model | Fusion X-Par 12Z |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 5678 MB |
