GLP Fusion X-Par 12Z handleiding
Handleiding
Je bekijkt pagina 16 van 55
www.glp.de Installation
16 Fusion XPAR 12Z User Manual Rev. A
Installing on a rigging truss or similar structure
You can suspend an XPAR 12Z fixture from a rigging truss or pipe using a suitable clamp
attached to the integral mounting bracket of the XPAR 12Z.
If you are going to install the fixture hanging vertically downwards from a horizontal rigging
truss or pipe, you can fasten it to the truss using a G-clamp. If you are going to install the
fixture in any other orientation, you must use a half-coupler clamp that completely
surrounds the truss chord or pipe.
Figure 4. Truss mounting
1. Attach a suitable clamp to the mounting bracket of the XPAR 12Z as shown in Figure 4.
2.
Attach the clamp to the truss or structure.
3. Secure the fixture with a safety cable as described in ‘Securing fixtures with a safety
cable’ on page 14.
Bekijk gratis de handleiding van GLP Fusion X-Par 12Z, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | GLP |
| Model | Fusion X-Par 12Z |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 5678 MB |
