GLP FUSION Supernova SN70 handleiding
Handleiding
Je bekijkt pagina 8 van 32
Connections DMX
6
DMX
We recommend the use of High quality XLR connectors like original NEUTRIK. Please use real DMX cable with a surge impedance of
110 Ω.
Please notice that the USITT DMX Standard does allow the use a max of 32 DMX fixtures in one line. You should terminate the signal
by a 120 Ω resistor.
In the Standard mode the Supernova RGBW uses 12 DMX channels.
Connect the devices and increase the value of the DMX channel by 12 from one device to another
Wireless DMX
The Device is equipped with a Wireless DMX Input from Lumenradio. The receiver is also compatible with the Wireless Solution G3
protocol.
To establish a connection simply use the “Link” Option in the Supernova RGBW Menu and set your transmitter to the Link Mode.
After both devices are linked you will be able to control the Supernova RGBW via Wireless DMX, as long as the W-DMX Mode is
turned on in the Menu.
Controller
DMX Address 1
DMX Address 13
DMX Address 25
Bekijk gratis de handleiding van GLP FUSION Supernova SN70, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | GLP |
| Model | FUSION Supernova SN70 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3466 MB |
