GLP FUSION Stick FS16Z handleiding
Handleiding
Je bekijkt pagina 8 van 73
www.glp.de
8 Fusion FS 16Z User Manual Rev. 20240625-01
● Do not place any optical components other than Fusion FS 16Z accessories from
GLP onto the front of the fixture.
● Do not stick filters, masks or other materials onto the fixture. Do not block the light
output in any way. The front surface becomes hot during operation and can melt or
ignite objects that are in contact with the surface. Ensure that the front surface Is
clean and unobstructed at all times in order to prevent a fire hazard and damage
to the fixture.
● The fixture’s optical components can focus the sun’s rays, creating a risk of fire and
damage. Do not expose the front of the fixture to sunlight or any other intense light
source, even from an angle.
Eye safety
● The FS 16Z is classified as a Risk Group 2 lighting fixture according to EN 62471.
Possibly hazardous radiation emitted. Do not stare into the light output from the
fixture. May be harmful to the eyes.
● Do not look at the fixture’s light output with optical instruments or any device that
may concentrate the light output.
● Make sure that persons near to or working on the fixture are not looking directly into
the light output when the fixture lights up suddenly. This can happen when power is
applied, when the fixture receives a DMX signal, or when certain control menu items
are selected.
● The warning below is printed on the fixture. If the warning becomes impossible to
read, replace it with a label reproduced from this illustration:
Bekijk gratis de handleiding van GLP FUSION Stick FS16Z, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | GLP |
| Model | FUSION Stick FS16Z |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 10685 MB |
