GLP FUSION Stick FS16Z handleiding
Handleiding
Je bekijkt pagina 23 van 73
German Light Products®
Fusion FS 16Z User Manual Rev. 20240625-01 23
1. See Figure 11. Place the Hanging Adaptor on the end of the fixture so that the
locking pin channels B in the end plate and the fixture mesh with each other.
2. Push the two locking pins A into the channels in the End Plate and the fixture so
that the Hanging Adaptor and fixture are locked together. Press the button on
each pin so that you can push the pin fully into its channel.
3. When the pin is fully engaged, release the button and check that the pin is now
locked in place.
4. Attach rigging clamps or eyelets which are suitable for the weight of the fixture(s)
to the holes C in the Hanging Adaptor. For hanging one or two fixtures in a chain,
use two clamps to prevent the fixture from turning. For hanging more than two
fixtures in a chain, use two M10 or M12 rigging eyelets with suitably rated cables.
6. As soon as you suspend the fixture from a truss using the rigging clamp, install a
safety cable as described in ‘Attaching mounting brackets to the fixture’ on page
16 if there is any risk that the fixture will cause injury or damage if it falls.
Bekijk gratis de handleiding van GLP FUSION Stick FS16Z, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | GLP |
| Model | FUSION Stick FS16Z |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 10685 MB |
