GLP Fusion MBL20 handleiding
Handleiding
Je bekijkt pagina 17 van 38
German Light Products® Installation
Fusion MBL20 User Manual Rev. A 17
cause injury or damage if it falls.
Installing on a rigging truss or similar structure
You can suspend an MBL20 fixture from a rigging truss or pipe using a suitable clamp
attached to the Omega Bracket that is available from GLP as an optional accessory for the
MBL20.
If you are going to install the fixture hanging vertically downwards from a horizontal rigging
truss or pipe, you can fasten it to the truss using G-clamps. If you are going to install the
fixture in any other orientation, you must use half-coupler clamps that completely surround
the truss chord or pipe.
Figure 3. Omega bracket fasteners
1. Attach a suitable clamp to the Omega bracket accessory.
2. Line up the fasteners of the Omega bracket with the holes in the mounting bracket of
the MBL20 as shown in Figure 3.
3. Lock the Omega bracket onto the MBL20 by turning the fasteners through 90 degrees.
4. Attach the clamp to the truss or structure.
5. Secure the fixture with a safety cable as described in ‘Securing fixtures with a safety
cable’ on page 15.
Bekijk gratis de handleiding van GLP Fusion MBL20, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | GLP |
| Model | Fusion MBL20 |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 3922 MB |
