GLP FUSION Exo Beam 10 handleiding
Handleiding
Je bekijkt pagina 24 van 40
www.glp.de Features
24 EXO Beam 10 User Manual Rev. A
The default setting is Soft.
Strobe / shutter
A variety of strobing and fading effects can be produced by the fixture.
Prism
Two separate prisms allow beam splitting effects.
Each prism can be independently inserted in the beam path or removed, and can be
continuously rotated in either direction or set to an indexed position.
Behavior when the fixture is not receiving a DMX signal
You can set the fixture to react in three different ways if no DMX signal is present (if the
fixture is being controlled by DMX but the DMX signal stops, or if you apply power to
the fixture when no DMX signal is present):
● Blackout sets the fixture to black out. This is the default setting.
● Hold sets the fixture to continue obeying the last DMX values it received. If no DMX
signal was being received, the fixture will black out.
● Preset Scene sets the fixture to output a preset scene which you have previously
captured from an incoming DMX state using the Manual Control > Capture Scene
menu option. You can also manually set the control values (or edit the captured
values) using the attribute settings in the Manual Control menu.
All these settings are available via DMX on the Control / Settings channel and in the
fixture’s control panel.
Bekijk gratis de handleiding van GLP FUSION Exo Beam 10, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | GLP |
| Model | FUSION Exo Beam 10 |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 4339 MB |
