GLP FUSION Exo Beam 10 handleiding
Handleiding
Je bekijkt pagina 16 van 40
www.glp.de Installation
16 EXO Beam 10 User Manual Rev. A
To secure an EXO Beam 10 fixture with a safety cable:
Figure 3. Safety cable attachment
1. Loop a safety cable around a secure anchoring point such as a truss
beam or fixed structure so that it will catch the fixture if a rigging clamp fails.
Take up as much slack as possible in the safety cable (by looping it more than
once around the bar, for example).
2. See Figure 3 and Figure 4. Fasten the safety cable through the slot “B” on
the underside of the fixture base
. Check that the fixture is now secured.
Installing on a rigging truss or similar structure
You can suspend an EXO Beam 10 fixture from a rigging truss or pipe using suitable
clamps attached to the Omega Brackets supplied with the EXO Beam 10.
If you are going to install the fixture hanging vertically downwards from a horizontal
rigging truss or pipe, you can fasten it to the truss using G-clamps. If you are going to
install the fixture in any other orientation, you must use half-coupler clamps that
completely surround the truss chord or pipe.
Bekijk gratis de handleiding van GLP FUSION Exo Beam 10, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | GLP |
| Model | FUSION Exo Beam 10 |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 4339 MB |
