GLP Fusion Creos handleiding
Handleiding
Je bekijkt pagina 13 van 33
www.glp.de
Rev. 20240917-01 13
3. Outdoor usage
Although Fusion Creos fixtures have an IP rating for safe outdoor usage, the fixtures
are designed for temporary outdoor use only.
For important information on the outdoor use of IP-rated GLP fixtures, please see
the document "Safety and warranty information for using GLP lighting fixtures in
outdoor environments" available at the GLP website www.glp.de.
The IP rating system
Fusion Creos fixtures are rated IP65. The first figure 6 gives the level of protection
against dust and airborne particles. The second figure 5 gives the level of protection
against water and humidity.
• First figure 6: Dust-tight – No ingress of dust, complete protection against
contact.
• Second figure 5: Water jets – Protection against water projected from a 6.3mm
(0.25 in.) nozzle from any direction.
Important! Do not install fixtures in a location where water can pool around the
fixture. Do not allow the fixture to become submerged in any way.
Storage
When dismantling an installation, make sure fixtures are dry and clean before they
are stored. Residual moisture or wetness on the fixture can lead to early corrosion or
mold in flight cases or packaging.
Suitable environment
Fusion Creos fixtures are designed for flexible installation and removal and are
suitable for temporary outdoor applications only. Users must provide additional
protection against dust, water, temperature, UV radiation etc. and carry out regular
maintenance if used in permanent outdoor installation.
Temperature fluctuation
High humidity and large temperature changes can lead to condensation inside
fixtures. If a fixture is subject to a large change in temperature or humidity, allow 30
minutes for the fixture to acclimatize before it is powered on. This allows moisture
inside the fixture to escape via the vent valve. The time required depends on the
ambient conditions and you may need to allow more time.
Connectors and cables
When the fixture is installed outdoors, use power and data connectors and cable
that are rated IP65 minimum for connections to the fixture. Use cable connectors
which match the connectors fitted on the fixture. Bear in mind that not all
combinations of connectors maintain an IP rating. Ensure that connectors and
cables are assembled following the manufacturer’s instructions to maintain the
IP65 rating for the complete assembly.
Make sure that all connections are properly plugged and that protective caps are in
place on unused connectors. Use dielectric grease if necessary to ensure sealing.
Bekijk gratis de handleiding van GLP Fusion Creos, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | GLP |
| Model | Fusion Creos |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 5720 MB |
