GLP ArenaLED1 Touring handleiding

33 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 8 van 33
www.glp.de GLP ArenaLED1 Touring
8 GLP ArenaLED1 Touring Safety and User Manual
Strobe safety
Flashing light, particularly at 5 - 30 Hz, may cause seizures in persons with
photosensitive epilepsy. Do not use strobe effects for extended periods.
Comply with local regulations on the use of strobe lighting and notify the public
in advance with highly visible warning signs when strobe effects are used.
If a seizure occurs, stop using strobe effects. Seek professional medical help.
Note the time that the seizure starts and finishes. Call emergency medical help
urgently if the seizure lasts more than five minutes, if it is the person’s first
seizure, or if the person is injured. While waiting for help to arrive, protect the
affected person from injuring themselves on hard or sharp objects. If necessary,
move the person to a safe place. Lay them on their side with their head
supported to prevent it from hitting the floor. Loosen any tight clothing around
their neck. Do not use force to hold the person or restrict their movements. Do
not put anything in their mouth, including your fingers.
Installation safety and protection from personal injury
Installation must be performed by qualified personnel only and carried out in
accordance with applicable regulations such as DIN VDE 0711-217.
The fixture is not portable when installed.
Ensure that the supporting structure and installation hardware used can hold at
least ten times the weight of the load that they support. All rigging hardware
must be approved for the weight of the fixture.
Fasten the fixture to a structure or surface only as directed in this manual and
only with hardware that is specifically designed, approved and rated for its
purpose. Do not use a safety cable as the primary means of support.
Check that installation hardware is in perfect condition. Fasteners must be steel
grade 8.8 strength or better. Nuts must be self-locking type and in good
condition. Rigging clamps must be half-coupler type that completely encircle
the rigging truss chord.
If the fixture is installed in a location where it may cause injury or damage if it
falls, install as directed in this manual a safety cable or similar secondary
attachment that will hold the fixture if a primary attachment fails. The secondary
attachment must be approved by an official body such as TÜV as a safety
attachment for the weight that it secures, it must comply with EN 60598-2-17

Bekijk gratis de handleiding van GLP ArenaLED1 Touring, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkGLP
ModelArenaLED1 Touring
CategorieVerlichting
TaalNederlands
Grootte1825 MB