GLP ArenaLED1 Touring handleiding
Handleiding
Je bekijkt pagina 10 van 33
www.glp.de GLP ArenaLED1 Touring
10 GLP ArenaLED1 Touring Safety and User Manual
2. Avoiding damage to the fixture
Important! Follow the directions in this section carefully, or the fixture may suffer
damage that is not covered by the product warranty.
General precautions
Do not drop the fixture or expose it to mechanical stress.
Do not expose the fixture to heat (from other lighting fixtures for example).
Clean optical components only as directed in this manual. Oils, solvents, and other
chemicals commonly used for cleaning can damage the lens coatings and surfaces.
Use only original spare parts. Do not make any structural modifications to the
fixture or you will void the product warranty.
Protection against environmental factors
The fixture is protected to IP65. It is designed for temporary and permanent indoor
use and temporary outdoor use. It is protected against water drops and splashing,
but do not immerse it, install it in a location that may become flooded, or expose it
to high-pressure water jets. Do not allow water to pool on or around the pressure
relief valve on the back of the fixture.
For permanent outdoor installation, you must provide additional protection against
dust, water, low and high temperatures, UV radiation etc. and carry out regular
maintenance with scheduled service intervals.
The fixture is not suitable for permanent use in marine or coastal environments or
near sources of corrosive agents (a swimming pool that can release chlorine into
the atmosphere, for example). Installing the fixture in a harsh environment like one
of these will probably result in corrosion or excessive wear to case components,
moving parts, optics, cooling systems or even the interior of the fixture. Damage or
premature wear resulting from use in this type of environment is not covered by
the manufacturer's warranty.
Condensation
High humidity and strong temperature fluctuations can lead to condensation
inside fixtures. When a fixture is brought from a colder to a much warmer
environment, the risk of condensation is particularly high. Do not switch on the
fixture immediately. Let it warm up to room temperature before connecting it to
power.
In order to ensure that the fixture performs as it should, we strongly recommend
that you first bring the fixture to operating temperature and keep it there for at
least 30 minutes. This ensures that any moisture that has accumulated internally
can escape via the vent valve. The time required for residual moisture to escape
completely depends heavily on the ambient conditions of the installation and must
be adapted according to the situation.
Bekijk gratis de handleiding van GLP ArenaLED1 Touring, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | GLP |
| Model | ArenaLED1 Touring |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 1825 MB |
