Handleiding
Je bekijkt pagina 10 van 56
INSTALLATION
Before beginning installation, to better handle
the hood, we advise removing the filter.
Before fixing, the outlet exhaust duct for air
evacuation to the outside must be installed
Use an outlet exhaust duct with: - minimum
indispensable length; -Minimum possible bends (maximum angle of bend:
90°); -certified material (according to local, building & fire regulations); and
as smooth as possible inside. It is also advisable to avoid any drastic changes
in duct cross-section (recommended diameter: 125mm).
Drill the hole in the kitchen unit for the air outlet (133 mm diameter)。
Proceed with fixing the hood: Based on your requirements, you can fit the
hood on the wall or on a wall unit of your kitchen. IMPORTANT: Respect the
distance between the hob and the lower part of the hood, which must be at
least 650 mm for an electric hob and 750 mm for a gas hob.
φ133
80
A)Fixing to the wall
1. Draw a line on the wall in vertical line with your hob. Mark the 2 holes to
be drilled in the wall, respecting the distances indicated; Make the 2 holes
and fit the 2 screw anchors φ10X45 provided or another ones, but always
adapted to the type of wall. Take 2 of the screws ST5x50 provided and
insert them in the topmost screw anchors without. Connect a flexible tube
to the hood outlet adapter, using a metal hose clamp. Tube and hose
clamps are not provided.
9
Bekijk gratis de handleiding van Glem Gas GHC640WH, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Glem Gas |
| Model | GHC640WH |
| Categorie | Afzuigkap |
| Taal | Nederlands |
| Grootte | 4045 MB |
Caratteristiche Prodotto
| Soort bediening | Knoppen |
| Kleur van het product | Wit |
| Gewicht | 8200 g |
| Breedte | 600 mm |
| Diepte | 520 mm |
