Girmi AP85 handleiding
Handleiding
Je bekijkt pagina 14 van 42
13
ACCESSORY FLOOR BRUSH
The brush (12) is suitable for vacuuming on every kind of floor and carpet. It has a 180° pivot, to give more
freedom of movement and to clean under furniture and sofa.
It also features an integrated motor, that moves the brush, to collect more dirt.
- The brush (12) can be mounted directly to the main housing (3), inserting the connector of the brush in
the suction port (5). To clean floor and carpet we suggest to attach the brush (12) to the aluminium tube
(9), and tube to the port (5).
- To remove accessories press release buttons on aluminum tube, and on port (5).
TELESCOPIC TUBE
The aluminum tube (9) is telescopic and its lenght can be changed depending on user’s need.
Press button (8) and press or pull the upper part of tube to have the desired length.
ACCESSORY NOZZLE
The nozzle (10) is suitable for vacuuming in cracks, corners, tile joints and
narrow places. The nozzle also includes a brush suitable for vacuuming on
textile and surfaces.
- The nozzle (10) can be mounted directly to the main housing (3), inserting it in the port (5).
- Add the aluminum tube if you want to reach far surfaces like the ceiling. Mount nozzle to the tube (9),
and the tube to the port (5).
MAINTENANCE AND CLEANING
EMPTYING THE DUST CONTAINER
When dust reaches maximum level inside the container (6), it is necessary to remove it.
To empty the container (6), bring the vacuum cleaner above a bin and press the container
open button (14). This button will open the door dropping all the dirt. It is recommended
to do this outdoors to avoid soiling the house when the dust comes out of the trash. Close the lid.
FILTERING SYSTEM MAINTENANCE
This vacuum cleaner is equipped with a metallic filter (19-a) and a HEPA filter (17-b),
capable of retaining particles and small organisms such as mites and pollens. In this way
the air re-emitted from the cleaner will be more healthy and clean. To maintain the
performance of the vacuum cleaner is recommended to clean the filters regularly.
- Make sure you removed the dust from container. Press the lid open button (14).
- Extract the filtering system (a) rotating anti-clockwise and pulling out of container.
a) Take the HEPA filter (b) out of the filtering system and clean it as described below.
b) Filtering system includes the metal mesh filter and can be washed with running water.
At least once a week, shake the HEPA filter in the bin to get the dirt out.
At least once every 2 months, carry out a more thorough cleaning: rinse HEPA filter nd metal filter and clean
container with a damp cloth and DRY ALL PARTS THOROUGHLY.
CAUTION: Do not use detergent to clean the filter or the filtering system. All the parts must be
completely dry before using the vacuum cleaner.
If you want to make a deeper cleaning, you may need to detach the container. Press the container release
button (15) to detach it. This button is small and incorporated in the housing of container near the battery.
After cleaning:
- Insert HEPA filter (b) in the filtering system (a).
- Mount filtering system (a) in the container, inserting in its seat and rotating clockwise until blocking.
- Mount the container (6) to the main housing (3).
BRUSH MANTAINANCE
It is recommended to periodically check the condition of the brush and if it is dirty it should be cleaned.
- Take the motorized brush (12) and turn upside down.
- Under the left wheel there is a lever. Pull it to the right to open the lid blocking the rotating brush.
- Extract the rotating brush and clean it; use a vacuum cleaner or wash it with tap water and then dry it.
- Clean the internal part of the brush (12) and the suction tube. Mount the brush.
Bekijk gratis de handleiding van Girmi AP85, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Girmi |
| Model | AP85 |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 4843 MB |
