Giordani G-Dream Together handleiding
Handleiding
Je bekijkt pagina 15 van 44
With a convenient device to fix the crib
to the adult bed so that the child stays
close to its parents. It makes it easy for
parents to feed or care for their baby,
and can be used as a stand-alone crib.
The breathable mesh on three sides
helps air circulate.
This product is adjustable to 6 heights
and can therefore be adapted to adult
beds with a height between 55 and 68
cm from the floor to the top of the adult
bed mattress.
Silence wheels are included for ease of
movement.
The crib can be inclined by a maximum
of 3 positions between one leg and the
other (the maximum tilt must be less
than 10°).
With steel frame for easy assembly and
disassembly. The fabric can be easily
removed for cleaning.
With high elastic sponge premium
mattress, good air permeability,
especially suitable for newborns.
ASSEMBLY INSTRUCTIONS
1. Take out the legs. Insert the crossbar into
both legs (Figure 1) until you hear a ‘click’
sound.
2. Tighten the screws as shown in Figure 2.
3. Position the frame as shown in Figure 3.
4. Remove the steel frame (Figure 4).
5. Insert it into both sides (Figure 5) until
you hear a ‘click’ sound.
6. Position the frame as shown in Figure 6.
7. Remove the crib body.
8. Insert it into both legs from the top until
you hear a ‘click’ sound.
9. Put the mattress into the crib body.
10. Attach the Velcro to the steel frame
(Figure 10).
HOW TO ADJUST THE CRIB HEIGHT
11. To adjust the crib height, pull the two
plastic parts as shown in the picture.
Adjustable to 6 heights.
12. The crib can be inclined by a maximum
of 3 positions between one leg and the
other (the maximum tilt must be less
than 10°). For example, if the left leg
is in position 1, the other leg can be in
position 4. The head of the child should
always be positioned on the highest
side. This function is only available
when the product is in crib mode.
WHEEL BRAKES
13. When the baby is in the crib, make
sure that the 4 wheel brakes are in
the locked position.
REMOVABLE FRONT PANEL
14. To wash the crib body, remove the front
panel first. Reassemble aer washing.
DISASSEMBLING THE CRIB POCKET
15. Take out the mattress and remove the
crossbar, then loosen the lower hook &
loop fasteners. Open the zip of the crib
pocket and remove the fabric part.
MATTRESS
16. Please use the mattress provided.
When assembling the fabric part of
the mattress after washing, always
install the foam part first and then
the fibreboard. 2.5 CM PREMIUM
BREATHABLE MATTRESS.
HOW TO FIX THE CRIB
TO THE ADULT BED
17. Open the flap cover and zip completely.
Remove the plastic connectors from
the tubes on both sides and lower
the drop side of the crib. Attach it to
the base of the crib body using the
elastic snap closure on both sides.
WARNING! Use the crib with the tube
UK
Giordani -dream ToGeTher
15
GR399_DREAM TOGETHER_Culla_v2ok.indd 15GR399_DREAM TOGETHER_Culla_v2ok.indd 15 01/08/24 15:2701/08/24 15:27
Bekijk gratis de handleiding van Giordani G-Dream Together, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Giordani |
| Model | G-Dream Together |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5773 MB |
