Handleiding
Je bekijkt pagina 31 van 68
21
Model: GVHC & FInstallation
2.07 Final Installation
1. Confirm that both hood and cooking appliances are properly wired and that installation of the fire suppression
system is complete.
2. Ensure that the hood is located in its final position and that it is suitably level and stable.
3. Two (2) mounting brackets are provided for securing the hood to the countertop, one for each side of the base.
They can be placed at most any position along the hood base, but preferably should be located approximately
at the midpoint.
4. Use the supplied #10 x 1/2” selfdrilling screws to attach the brackets to the base. Use screws which are
appropriate for the countertop material (not supplied) to fasten brackets to the countertop.
5. Apply a bead of foodgrade silicone around the entire base perimeter to create a liquidtight seal and to prevent
infiltration of pests.
6. Hood installation must comply with all applicable health and sanitation codes and regulations.
NOTE:
Before operating the hood, remove all remaining protective film from the outer surfaces of the hood, skirt and
base. Clean all exterior sheet metal surfaces with a good quality stainless steel cleaner/polish.
Food Grade
Silicone
Mounting
Bracket (2)
Selfdrilling Screws
(Supplied)
Appropriate Fastener
(Not Supplied)
CounterTop Installation (GVHC)
Continued on Next Page
Bekijk gratis de handleiding van Giles GVH-C, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Giles |
| Model | GVH-C |
| Categorie | Afzuigkap |
| Taal | Nederlands |
| Grootte | 16793 MB |
