Giles GHM-4C handleiding
Handleiding
Je bekijkt pagina 33 van 57
Operation
Heated Merchandiser
GHM-LED Series
The following explains how to setup & layout the steam pan grid in the merchandiser’s main pan.
Before installing support dividers & pans, be sure that heat controls (top & bottom) are OFF & the
unit is adequately cool.
1. Setting up the main pan can be performed from either the front or rear of the appliance. Lift the front glass ① or
open the rear sliding doors ②.
2. Install the provided long pan support channels
③. Place one onto each set of channel alignment brackets ④ at
tached along the front & back rim of the main pan.
3. Install supplied short pan support channels ⑤ between each of the long support channels to create a pan grid to
suit your particular need. Enough short channels are provided with each unit to create the grids shown in examples
#2 & #3 on page 25.
The GHM is a dry heat warmer. The main pan is NOT “liquid tight” ... liquids will leak into the heat
ing element compartment, creating a significant electrical shock hazard. DO NOT PUT WATER or
ANY OTHER LIQUID into the pan well ... doing so will void the factory warranty.
4.01 Pan Installation & Set Up
4
1
3
2
5
23
Bekijk gratis de handleiding van Giles GHM-4C, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Giles |
| Model | GHM-4C |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11742 MB |
