Giles GGF-400 handleiding

99 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 23 van 99
14
Installation
GGF Series Gas Fryer
2.10. Blower Vacuum Switch Setting & Adjustment
The blower vacuum switch ensures that proper draft airflow exist before allowing the gas valve to open for
ignition. The switch is factoryset, but differences in conditions at installation sites can affect settings. Use the
following steps to confirm that the vacuum switch is adjusted properly for the local conditions.
Burners must be ignited ... NEVER
check or adjust
the blower vacuum switch without having fry pot
filled with water.
1. Restart fryer.
2. With burners ON, use a piece of noncombustible
material
to diagonally block (corner to corner) about
half of the flue stack opening.
3. Burner(s) & the draft fan should shutdown. When
the opening is unblocked, the fan should restart &
burner(s) should reignite. If this occurs as described,
the setting is satisfactory, go to Step8.
If burner(s) fail to shutdown, the blower vacuum
switch must be adjusted as follows:
4. Shutdown fryer.
5. Remove retaining screws at top of the control panel
& lower panel.
6. Locate pressure switch on left side of the component
box. If still in place, remove plastic cover
.
7. To increase sensitivity, slowly rotate the pressure
switch adjustment dial to the right (clockwise) ... turn
to the left (counterclockwise) to decrease. Restart
fryer & repeat Step2 thru 3. As necessary, continue
incremental adjustments until the burner(s)
consistently shutdown when approx. half of the stack
opening is blocked.
Shutdown fryer ... resecure the control panel.
8. Drain water from the fryer into a suitable container
(NOT Filter Pan
). Proceed to Section 2.11.
During the next steps use great caution & wear
thermal hand protection. The air exhausted from the
flue stack is EXTREMELY HOT
!!
NonCombustible
Material
Flue Stack
Vacuum Switch

Bekijk gratis de handleiding van Giles GGF-400, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkGiles
ModelGGF-400
CategorieNiet gecategoriseerd
TaalNederlands
Grootte31766 MB