Handleiding
Je bekijkt pagina 21 van 110
Template Module, Version 2.2, 15.11.2022 / Template Basiseinstellungen - 29.11.2022
Connect, Charge, and Power On the Baby Monitor
Gigaset BABY300 Video / ALL EN en / A31008-N1225-B101-1-43 / BABY300_en.fm / 5/22/25
21
en
Charge the Parent Unit Battery
Note:
• Before using the baby monitor for the first time, charge the Parent Unit battery for 12 hours.
When the Parent Unit battery is fully charged, the battery icon segments become solid .
• The standby time varies depending on your actual usage time and the age of the battery.
The battery icon on the screen indicates the battery status:
Power On or Off the Baby Monitor
1 Connect the Baby Unit to a power supply to turn it on. Disconnect the Baby Unit to turn it off.
2 The Parent Unit turns on automatically after connecting to the power socket, and the
welcome screen appears. You can press and hold
to turn it on or off.
Status Check
Once your Baby Unit and Parent Unit are powered on and connected, your Parent Unit displays
video from the Baby Unit. The green
Link LED light flashes and turns on steady when
connected.
Battery Indicators Battery Status Action
The screen displays . The
red LED light flashes.
The battery has very little
charge and may be used for
only a short time..
Charge without interruption
(about 30 minutes).
The battery icon segments are
solid .
The battery is fully charged. To keep the battery charged,
connect it to AC power when
in use.
Press and
hold
Bekijk gratis de handleiding van Gigaset Baby 300 Video, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Gigaset |
| Model | Baby 300 Video |
| Categorie | Babyfoon |
| Taal | Nederlands |
| Grootte | 9485 MB |
