Gigabyte X870 AORUS Elite WIFI7 handleiding

Lens

Gigabyte

45 pagina's

PDF beschikbaar

Handleiding

- 26 -

* Types of M.2 SSDs supported by each M.2 connector:

M.2 PCIe p26-x4 SSD M.2 PCIe p26-x2 SSD M.2 SATA SSD

M2A_CPU

a a

M2D_SB

a a

M2C_CPU

(Note)

a a

M2B_CPU

(Note)

a a

(Note) Actual support may vary by CPU.

M2D_SB/M2B_CPU:

Step 1:

Turn the M.2 EZ-Latch Click clip on the M2C_CPU connector clockwise and remove the motherboard heatsink.

Locate the proper mounting hole for the M.2 SSD to be installed and secure the M.2 EZ-Latch Plus clip in the

hole rst.

Step 2:

Insert the M.2 SSD into the M.2 connector at an angle. Press down on the front end of the M.2 SSD and make

sure the M.2 SSD is secured by the clip.

Step 3:

Remove the protective lm from the bottom of the motherboard heatsink, and nally, turn the M.2 EZ-Latch Click

clip clockwise and then install the heatsink back in place.

Follow the steps below to correctly install an M.2 SSD in the M.2 connector.

M2A_CPU/M2C_CPU:

Step 1:

Turn the M.2 EZ-Latch Click clip clockwise and remove the motherboard heatsink.

Step 2:

Remove the protective lm from the thermal pad (only the M2A_CPU connector has the thermal pad) on the

M.2 connector. Insert the M.2 SSD into the M.2 connector at an angle.

If you want install an M.2 SSD in the 110mm hole, remove the EZ-Latch Plus clip from the 80mm hole rst.

& Please visit GIGABYTE's website for details on using M.2 EZ-Latch Click/M.2 EZ-Latch Plus.

M.2 SSD installation with M.2 EZ-Latch Click: https://www.gigabyte.com/WebPage/1048/M.2-EZ-Latch-Click.html

M.2 SSD installation with M.2 EZ-Latch Plus: https://www.gigabyte.com/WebPage/920/M2-latchplus.html

M.2 SSD removal with M.2 EZ-Latch Plus: https://www.gigabyte.com/WebPage/921/removeM2.html

* Motherboard heatsink design may vary by model.

If you wish to replace the thermal pad, it is recommended to use one with a thickness of 1.25mm.

Step 3:

Press down on the front end of the M.2 SSD and make sure the M.2 SSD is secured by the clip. Remove the

protective lm from the bottom of the motherboard heatsink, and nally, turn the M.2 EZ-Latch Click clip clockwise

and then install the heatsink back in place.

Bekijk gratis de handleiding van Gigabyte X870 AORUS Elite WIFI7, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.