Gigabyte TRX50 AERO D handleiding

44 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 10 van 44
2-3 Installing the CPU and CPU Cooler
Read the following guidelines before you begin to install the CPU:
Make sure that the motherboard supports the CPU.
(Go to GIGABYTE's website for the latest CPU support list.)
Prepare a T20 star screwdriver.
Always turn off the computer and unplug the power cord from the power outlet before installing the
CPU to prevent hardware damage.
Apply an even and thin layer of thermal grease on the surface of the CPU.
Do not turn on the computer if the CPU cooler is not installed, otherwise overheating and damage
of the CPU may occur.
Set the CPU host frequency in accordance with the CPU specications. It is not recommended
that the system bus frequency be set beyond hardware specications since it does not meet the
standard requirements for the peripherals. If you wish to set the frequency beyond the standard
specications, please do so according to your hardware specications including the CPU, graphics
card, memory, hard drive, etc.
The CPU carrier frame must be slided into the CPU rail frame with the CPU. Do not remove the
CPU from the CPU carrier frame.
CPU
Pin One Triangle
CPU Carrier
Frame
AMD Socket sTR5
CPU Load Plate Screw
CPU Load Plate
Screw
Pin One Triangle
& Please visit GIGABYTE's website for details on hardware installation.
https://www.gigabyte.com/WebPage/210/quick-guide.html?m=sw
A. Note the CPU Orientation
Note the pin one markings on the motherboard's CPU socket and the CPU.
- 10 -

Bekijk gratis de handleiding van Gigabyte TRX50 AERO D, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkGigabyte
ModelTRX50 AERO D
CategorieNiet gecategoriseerd
TaalNederlands
Grootte4560 MB

Caratteristiche Prodotto

Kleur van het productZwart
Breedte305 mm
Diepte264 mm
Hoogte35 mm
Gewicht verpakking3040 g