Gigabyte MX33-BS0 handleiding
Handleiding
Je bekijkt pagina 13 van 81
- 13 -
Hardware Installation
1-4-2 Installing and Removing a Memory Module
Before installing a memory module, make sure to turn off the computer and unplug the
power cord from the power outlet to prevent damage to the memory module.
Be sure to install DDR4 ECC UDIMMs on this motherboard.
1
2
2
Follow these instructions to install a UDIMM module:
1. Insert the UDIMM memory module vertically into the UDIMM slot and push it down.
2. Close the plastic clip at both edges of the UDIMM slots to lock the UDIMM module.
Note: For dual-channel operation, UDIMMs must be installed in matched pairs.
3. Reverse the installation steps when you want to remove the UDIMM module.
Note:
DIMM must be populated in sequential alphabetic order, starting with bank A0.
Type
DIMM Slots
per
Channel
DIMMs
populated
per channel
Supported
Voltage
POR Speed (MT/s)
Ranks per DIMM
(1R=one rank)
Mem DIMM
Device
Maximum
Memory
Capacity
DDR4
ECC
UDIMM
2 2
1.2V
2666/ 2933/ 3200 1R1R 1Rx8 64GB
2 2 2666/ 2933 2R2R 2Rx8 128GB
2 1 2666/ 2933/ 3200 1R0R 1Rx8 32GB
2 1 2666/ 2933/ 3200 2R0R 2Rx8 64GB
Bekijk gratis de handleiding van Gigabyte MX33-BS0, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Gigabyte |
| Model | MX33-BS0 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9403 MB |
