Gigabyte MX33-BS0 handleiding
Handleiding
Je bekijkt pagina 11 van 81
- 11 -
Hardware Installation
1-3 Installing and Removing the CPU
Read the following guidelines before you begin to install the CPU:
•
Make sure that the motherboard supports the CPU.
•
Always turn off the computer and unplug the power cord from the power outlet before installing
the CPU to prevent hardware damage.
•
Unplug all cables from the power outlets.
•
Disconnect all telecommunication cables from their ports.
•
Placethesystemunitonaatandstablesurface.
•
Open the system according to the instructions.
WARNING!
Failure to properly turn off the server before you start installing components may cause serious
damage. Do not attempt the procedures described in the following sections unless you are a
qualiedservicetechnician.
Follow these instructions to Install the CPU:
1. Gently press the CPU socket lever handle down to unclip it.
2. Completely lift the CPU socket lever and the metal load plate will be lifted as well.
3. HoldtheCPU withyour thumband indexngers.Alignthe CPUpin one(triangle marking)with the
pin one corner of the CPU socket (or you may align the CPU notches with the socket alignment keys).
Gently insert the CPU into position.
4. Once the CPU is properly inserted, carefully replace the load plate.
5. When replacing the load plate, make sure the front end of the load plate is under the shoulder screw.
Then, remove the CPU cover.
Note:
Save and replace the CPU cover if the processor is removed from its socket.
6 Secure the CPU socket lever.
1
2
3
4
5
6
Bekijk gratis de handleiding van Gigabyte MX33-BS0, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Gigabyte |
| Model | MX33-BS0 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9403 MB |
