Ghibli & Wirbel ROUND 45 SM 55 BC PLUS TOUCH handleiding

Boenmachine

Ghibli & Wirbel

24 pagina's

PDF beschikbaar

Handleiding

www.ghibliwirbel.com

Professional Cleaning Machines Since 1968

EN -

Brushing only cycle:

- To perform only the brushing cycle, press

the button (46 Fig. 9) to enable brush ro-

tation.

- Close the water tap.

- Touch the touch sensor to start the rota-

tion of the brush (for models with integrat-

ed traction it also starts traction).

Washing, brushing cycle:

- Press the button (46 Fig. 9) to enable

brush rotation and water dispensing.

Touch the touch sensor to start the rota-

tion of the brush and the water supply

(for models with integrated traction it also

starts traction).

Washing, brushing, drying cycle:

- Press the button (48 Fig. 9) to start the

suction unit; button (46 Fig. 9) to enable

brush rotation and water dispensing.

Touch the touch sensor to start the rota-

tion of the brush and the water supply

(for models with integrated traction it also

starts traction).

8.1.c - Using the machine (Fig. 1)

- After starting the machine and choosing

the type of cycle, start cleaning, by push-

ing the machine using the handle (1 Fig.

1) or by touching the touch sensor (20

Fig. 1), to start the drive (for models with).

NOTE:

Pay attention to particularly delicate floors;

do not use the machine while it’s stopped

and the brush rotation on.

It is possible (for machines with traction), in

the case of particularly difficult stains, to ad-

just the traction speed to 0 so that the brush

always turns in the same position, without

straining the traction motor.

NOTE:

The proper cleaning and drying of the oor

is done by pushing the machine forwards;

if you go backwards the machine will not

perform drying; in this phase, always lift the

wiper to avoid damaging the blades.

- Adjust the traction speed (if present) as

shown above.

- If necessary, adjust the amount of wash-

ing water using the tap (4 Fig. 9).

- Check the battery charge status using the

instrument (47).

8.1.d - Adjusting the movement direc-

tion (Fig. 12)

If during the cleaning operation (rotating

brushes) we notice that the machine is not

moving in a straight line, but tends to go left

or right, you can adjust the direction of the

wheels (50).

- Start the machine and begin the rotation

of the brushes.

If the car tends to go to the right, gently

turn the wheel button (50) to “S” until the

direction is right;

If the car tends to go to the left, gently

rotate the wheel button (50) to “D” until

the direction is right.

8.1.e - Adjusting traction help (only

for models without traction)

(Fig. 12)

The function of the hand wheel (51) is to in-

crease / decrease the ground pressure of the

brush in order to facilitate thrusting forward

the machine.

- Turning the hand wheel (51) clockwise

will decrease traction adjustment and

conversely it will increase it.

Man_round-rapid_ROUND45SM-SD-Rapid_3ed_01-2019_49026700.indd 9 28/01/19 09:49

Bekijk gratis de handleiding van Ghibli & Wirbel ROUND 45 SM 55 BC PLUS TOUCH, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.