Ghibli & Wirbel ROUND 45 D 55 BC CHEM TOUCH handleiding

Boenmachine

Ghibli & Wirbel

32 pagina's

PDF beschikbaar

Handleiding

www.ghibliwirbel.com

Professional Cleaning Machines Since 1968

ENGLISH -

Disable to disable it or “Enabled” to en-

able it and then press the button (51) “

” to confirm your choice.

8.1 DISPLAY (Fig. 9-10)

The following pictograms appear on the dis-

play:

“A” = Battery

Indicates the battery charge status;

“A1”

= battery charged;

“A2”

= battery discharged.

MAX

= traction speed (if present)

The movement speed can be changed from

“0“ to the maximum speed in 5 steps, using

buttons “ ” and “ ” to increase or de-

crease the speed.

“ ”= reverse (if present)

This appears on the display when selecting

the button “ ” and a reverse operation is

performed; when the button is released the

pictogram disappears.

“ ” = Aspirator operating

This appears on the display when selecting

the button “ ” indicating that the aspirator

is operating; when repressing the button “

” to stop operation, the pictogram will

flash for a few seconds and disappears when

the aspirator stops.

“ ”= Silent operation

Vacuum in operation.

This appears on the display when selecting

the button “ ” indicating that the aspirator

is operating at a reduced speed; by press-

ing again the button “ ” and holding it for

a few seconds, the symbol “ ” will disap-

pear and then you will see the symbol

“ ”

activating the normal operation.

“ ” = Water dispensing presetting

This appears on the display when select-

ing the button “ ” indicating that the wa-

ter dispensing solenoid valve is enabled; by

repeatedly pressing the button (51) “ ”

the amount of water is increased; once the

maximum amount is reached, the display will

show the symbol ” ”; repressing the button

(51) will disable the function.

“ ”= Brush rotation presetting

This appears on the display when selecting

the button “ ” indicating that brush rotation

is enabled; when repressing the button “

” brush rotation motor operation is disabled

and the pictogram disappears.

“ ” = Maximum fluid level in the tank

This displays when the fluid in the recovery

tank has reached hte maximum level.

“

” = Chemical agent dispenser

(optional)

This appears on the screen when you press

the button (49) “ ” indicating the dispensed

amount of chemical agent.

“

ECO

” = ECO mode

It displays, when the ECO function is active,

with the button (88) (88) “

ECO

” .

9.1 FILLING THE TANK

(Fig. 11)

WARNING:

Only add clean mains water to the tank at

a temperature no greater than 50°C.

- Before filling the tank, check the level of

the chemical agent (if any), as indicated

in the relevant section.

- Remove the hose (26) supplied, connect

one end (26a) to a tap and insert the oth-

er end (26b) in the tank (5).

- Check that the tap (53) is open.

MAN_ROUND45TOUCHECO_5ed_04-2023_49026000.indd 11MAN_ROUND45TOUCHECO_5ed_04-2023_49026000.indd 11 30/03/2023 08:42:2930/03/2023 08:42:29

Bekijk gratis de handleiding van Ghibli & Wirbel ROUND 45 D 55 BC CHEM TOUCH, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.