Ghibli & Wirbel POWER EXTRA 31 handleiding

Stofzuiger

Ghibli & Wirbel

76 pagina's

PDF beschikbaar

Handleiding

www.ghibliwirbel.com

Professional Cleaning Machines Since 1968

EN -

NOTE:

To prevent the detergent pump from break-

ing, it is recommended that you stop its op-

eration, pushing the relative switch, when

dosing has not occurred for several minutes.

NOTE:

When the recovery tank is full, noise in-

creases and the appliance does not suction;

therefore, switch it off and empty the tank as

described in the relevant paragraphs

Switching off the appliance

- Press the switches (24 - 25 - 25a Fig.

16) to “0” to switch off the appliance; the

lamps on the switches will go out.

- Remove the plug (23 Fig. 15) from the

electrical socket.

CLEANING AND

MAINTENANCE

DANGER:

Before performing any maintenance op-

erations, unplug the appliance from the

electrical socket.

Daily cleaning

Emptying the recovery tank

- Position yourself over a floor drain with

the appliance.

- Detach the drain hose (28 Fig. 19) from

its relative support.

- Unscrew the knob (29 Fig. 19) and re-

move the cap (30 Fig. 19) of the water

drain hose (28 Fig. 19) and empty the liq-

uid into the recovery tank (31 Fig. 19).

Cleaning the detergent dosing circuit

At the end of each workday, clean the de-

tergent dosing circuit as follows to prevent

clogging:

- Release pressure from the circuit by

pressing, with dosing pump off, the lever

(27 Fig. 18) or lever (26 Fig. 17).

- Disconnect the suction pipe detergent (6

Fig. 4).

- Release the levers (32 Fig. 20) and re-

move the complete cylinder head (7 Fig.

20) of the recovery tank (31 Fig. 20).

- Tilt the tank (7a Fig. 21) to discharge the

detergent in a container.

- Wash the inside of the detergent contain-

er with running water.

- Reassemble all of the parts performing

these operations in the reverse order.

- Pour clean water into the detergent con-

tainer, electrically connect the appliance

and start the dosing pump by pressing

the switch (24 Fig. 16).

- Clean the circuit by pressing the lever (27

Fig. 18) or (26 Fig. 17), depending on the

type of mouthpiece.

- Dispense the liquid from the nozzle until

clean water comes out.

- Empty the water in the detergent tank as

described above.

Cleaning the appliance body

- Clean the unit body with a cloth damp-

ened with water or a mild detergent.

- Remove the cover as indicated previous-

ly and clean the inside of the tank with

running water, leaving the drain hose

open (28 Fig. 19) then reassemble eve-

rything proceeding in reverse order.

DANGER:

Do not wash the appliance using jets of

water.

Bekijk gratis de handleiding van Ghibli & Wirbel POWER EXTRA 31, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.