GeoVision GV-GVS2100 handleiding
Handleiding
Je bekijkt pagina 53 van 85
49
5.4.9 Face Detection
Face detection function is to detect the face appearing in the surveillance scene. Alarms will
be triggered when a face is detected.
The setting steps are as follows:
1. Go to Config→Event→Face Detection as shown below.
2. Enable the face detection function.
Save Source Information to SD Card: if checked, the whole picture will be saved to the local
PC or SD card when detecting a face.
Save Face Information to SD Card: if checked, the captured face picture will be saved to the
local PC or SD card when detecting a face.
Note: To save images to the local PC, please enable the local smart snapshot storage first
(Config→System→Local Config). To save images to the SD card, please install an SD card
first.
3. Set alarm holding time and alarm trigger options. The alarm trigger setup steps are the
same as motion detection setup. Please refer to 5.3.1 Motion Detection for details.
Bekijk gratis de handleiding van GeoVision GV-GVS2100, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | GeoVision |
| Model | GV-GVS2100 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 14248 MB |
