GeoVision GV-GVS2100 handleiding

Handleiding

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879808182838485/ 85

Afdrukken

Je bekijkt pagina 19 van 85

15

2. Go to Config →Network→TCP/IP→PPPoE Config menu. Enable PPPoE and then enter the

user name and password from your internet service provider.

3. Go to Config →Network→DDNS menu. Before configuring the DDNS, please apply for a

domain name first. Please refer to DDNS configuration for detail information.

4. Open the IE browser and enter the domain name and http port to access.

Access through static IP

Network connection

The setup steps are as follow:

1. Go to Config→Network→Port menu to set the port number.

2. Go to Config →Network→TCP/IP menu to set the IP address. Check “Use the following IP

address” and then enter the static IP address and other parameters.

3. Open the IE browser and enter its WAN IP and http port to access.

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879808182838485/ 85

Bekijk gratis de handleiding van GeoVision GV-GVS2100, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Andere merken in Niet gecategoriseerd