GeoVision GV-GBLF4802 handleiding
Handleiding
Je bekijkt pagina 14 van 77
3
1.1.2 Direct Access via Web Browser
The default network settings are as shown below:
IP address: 192.168.0.10
Subnet Mask: 255.255.255.0
Gateway: 192.168.226.1
HTTP: 80
Data port: 9008
Use the above default settings when logging in the camera for the first time. Directly connect
the camera to the computer through network cable.
1. Manually set the IP address of the PC and the network segment should be the same as
the default settings of the IP camera. Open the network and share center. Click “Local
Area Connection” to pop up the following window.
2. Select “Properties” and then select internet protocol according to the actual situation (for
example: IPv4).
Bekijk gratis de handleiding van GeoVision GV-GBLF4802, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | GeoVision |
| Model | GV-GBLF4802 |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 13260 MB |
