Gentrax GTX6600 handleiding
Handleiding
Je bekijkt pagina 9 van 18
8
4. Turn the engine switch to the RUN position.
5. Push choke rod to the RUN position.
6. Warm up the engine without a load for a few minutes.
B Remote start
1. Please make sure the fuel shutoff valve to the ON position, the
choke rod to the RUN position, the engine switch to the RUN
position.
2. Press the button on the remote control (key fob) twice.
3. Please wait 10 seconds and repeat again if it couldn’t start.
4. Warm up the engine without a load for a few minutes.
CAUTION:
⚫ Make sure there are enough fuel inside the generator tank.
⚫ Make sure generator battery fully be charged and at least charged
each two months
USING ELECTRIC POWER
1. AC APPLICATION
(a) Check the AC pilot lamp for proper voltage.
(b) Turn off the switch(es) of the electrical appliance(s) before
connecting to the generator.
(c) Insert the plug(s) of the electrical appliance(s) into the receptacle.
CAUTION:
⚫ Be sure the electric apparatus is turned off before plugging in.
⚫ Be sure the total load is within generator rated output.
⚫ Be sure the socket load current is within socket rated current.
⚫ The economy control switch must be turned to OFF when using
electric devices that require a large starting current, such as a
compressor or a submergible pump.
RUN
ENGINE
SWITCH
RUN
ENGINE
SWITCH
OFF
ECON. SW
CHOKE ROD
RUN
Bekijk gratis de handleiding van Gentrax GTX6600, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Gentrax |
| Model | GTX6600 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2624 MB |
