Gentrax GTX6600 handleiding
Handleiding
Je bekijkt pagina 11 van 18
10
(b) Connect between the DC output socket and the battery terminals
using the charging leads. The leads shall be connected making
sure of the (+) and (-) polarity.
(c) The DC circuit protector is to be set to ON after confirming the
connection, if the protector is in OFF position.
CAUTION:
⚫ Be sure the economy control switch is turned off while charging the battery.
STOPPING THE ENGINE
1. Turn off the power switch of the electric apparatus or disconnect any
electric devices.
2. Turn the engine switch to STOP position.
Click remote switch to the position.
3. Turn the fuel cock lever to OFF.
.
CAUTION:
⚫ Place the engine switch in the STOP position if the generator set is
not used for a long time.
If it is placed in the RUN position, the remote control module is in
the state of receiving signal, which will consume the battery power,
and the battery needs to be charged regularly.
STOP
ENGINE
SWITCH
OFF
Bekijk gratis de handleiding van Gentrax GTX6600, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Gentrax |
| Model | GTX6600 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2624 MB |
