Geneva Touring/S+ handleiding

Handleiding

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172/ 72

Afdrukken

Je bekijkt pagina 16 van 72

16

Keep pressed the or buttons to scroll the stations list.

When using your TOURING/S+ for the rst time, the radio needs to nd available

radio stations in your region (a scan function). After a SCAN, the stations will be

automatically stored.

• Hold down the button until “SCAN” displays. The indication will blink for

a few seconds, then the display will conrm that the rst station has been found.

“SCAN” is also needed after traveling to a new location that provides different

radio stations, or when you move the radio to a different room with a different

radio reception.

Presets

You can save six FM stations plus six DAB stations. To save a preset:

1. Select the station you want to save.

2. Long press until the display shows “PRESET 1” as blinking.

3. If you want to save using a different PRESET number, press or

to select the desired number.

4. After, long press to save the station.

To recall a preset:

1. Short press . The display will show the rst saved preset. If a saved

station is playing , the display will show the next saved preset.

2. If you want to recall a different station, press or

3. Wait two seconds and the unit will play the selected preset station.

Line-in

To connect a source device to your TOURING/S+, you need a stereo audio cable

with 3.5mm jack plug connector.

1. Connect the cable to the audio source device (headphone or line-out plug).

2. Connect the other end of the cable to the line-In socket on the back of the

TOURING/S+. The unit will automatically change mode to LINE IN.

3. By disconnecting the cable from TOURING/S+, the unit will return to the

previously selected mode.

Bluetooth

Mobile phones and computers with Bluetooth can connect to the TOURING/S+

and play music. The mobile phone or computer must support Bluetooth A2DP.

Initial set-up (“pairing”):

1. Press the key. The display will show “BLUE”. Wait for 20 seconds until

the display shows “PAIRING” as blinking .

2. Select “settings” on your mobile phone. Select “General/Bluetooth”. Turn on

Bluetooth. New Bluetooth devices are discovered automatically (on some devi-

ces you will need to press ‘scan’).

3. After a few seconds, “TOURING/S+” will appear.

4. Select “TOURING/S+”. The mobile phone is now connecting (“pairing”) to the

TOURING/S+.

5. If the mobile phone asks for a PIN, enter “0000” (four zeros).

6. You can now play music on your mobile phone and listen to it on the TOUR-

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172/ 72

Bekijk gratis de handleiding van Geneva Touring/S+, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Andere merken in Niet gecategoriseerd