Genesis GLCD2038B handleiding
Handleiding
Je bekijkt pagina 5 van 28
5
ENGLISH
SPECIFIC SAFETY RULES FOR CORDLESS DRILLS
WARNING: Do not let comfort or
familiarity with product (gained from repeated use)
replace strict adherence to product safety rules. If you
use this tool unsafely or incorrectly, you can suffer
serious personal injury!
WARNING: Hold the tool by insulated
gripping surfaces when performing an operation where
cutting tools may contact hidden wiring or its own cord.
Contact with a “live” wire will make exposed metal parts
of the tool “live” and shock the operator!
• Do not leave the tool running.
Operate the tool
only when hand-held
.
• Be aware that this tool is always in an
operating condition
,
because it does not have to
be plugged into an electric outlet.
• When operating the tool from an elevated
position
,
be aware of people or things beneath you.
• Always hold the tool firmly in your hands
before switching the tool “ON”
.
The reaction to
the torque of the motor as it accelerates to full speed
may cause the tool to twist
.
• Wear eye and hearing protection.
Always
use safety glasses with side shields. Unless otherwise
specified, everyday glasses provide only limited impact
resistance, they are not safety glasses. Use only certified
safety equipment; eye protection equipment should
comply with ANSI z87.1 standards. Protective hearing
equipment should comply with ANSI s3.19 standards.
• Protect your lungs
.
Wear a face or dust mask if
the operation is dusty. Following this rule will reduce the
risk of personal injury.
• Always disconnect battery pack from tool
or place the switch in the locked or off position before
any assembly, adjustments or changing of accessories.
Following this instruction will reduce the risk of serious
personal injury.
• Do not place battery tools or their batteries
near fire or heat.
This will reduce the risk of
explosion and possibly personal injury.
• Never use a battery which has been
dropped or received a sharp blow. A damaged
battery is subject to explosion. Properly dispose of a
dropped or damaged battery immediately.
• Use designated battery packs (Genesis™
- Model GLAB2015B, GLAB2020B or
GLAB2040B) and charger for this tool. Use of
any other batteries may result in a risk of fire.
WARNING: Read and understand all
warnings, cautions and operating instructions before
using this equipment. Failure to follow all instructions
listed below may result in electric shock, fire and/or
serious personal injury.
SYMBOLS
SYMBol DeSCripTion SYMBol DeSCripTion SYMBol DeSCripTion
V
Volts
RPM
Revolutions per
minute
Warning symbol. Precautions that involve
your safety
A
Amperes
SPM
Strokes per
minute
To reduce the risk of injury, read Operator's
Manual before using this product
Hz
Hertz
OPM
Oscillations per
minute
Wear safety glasses, ear protection and
respiratory protection
W
Watts
or A.C.
Alternating
current
Do not dispose with household waste
No Load Speed
or D.C.
Direct current Do not touch the running blade
kg
Kilograms
Do not use in
wet conditions
Class II Double Insulated construction
H
Hours
Battery cannot
exceed 59° C
This symbol designates that this product is
listed with U.S. and Canada requirements
by ETL testing Laboratories, Inc.
.../min
Per minute
Do not put
battery in fire
IMPORTANT: Some of the following symbols may be used on your product and appear throughout the manual.
Please study them and learn their meaning for critical information to operate the tool safely.
Bekijk gratis de handleiding van Genesis GLCD2038B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Genesis |
| Model | GLCD2038B |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4798 MB |
