Genesis GBDS430 handleiding
Handleiding
Je bekijkt pagina 8 van 40
English
Belt/Disc Sander
Operator’s Manual GBDS430
UNPACKING AND CONTENTS
IMPORTANT:Due to modern mass production techniques, it is unlikely the tool is
faulty or that a part is missing. If you find anything wrong, do not operate the tool until
the parts have been replaced or the fault has been rectified. Failure to do so could result
in serious personal injury.
CONTENTS IN PACKAGE
Item Description QTY Item Description QTY
WARNING: If any parts are missing or damaged, do not attempt to assemble
the tool, plug in power cord or turn the switch on until the missing or damaged parts are
replaced.
ASSEMBLY
WARNING: Always be sure that the tool is switched off and unplugged from the
power source before adjusting, adding accessories, or checking a function on the tool.
INSTALLING OR REPLACING SANDING DISC (FIG 3)
To Replace the Sanding Disc
INSTALLING OR REPLACING SANDING BELT (FIG 4)
To Replace the Sanding Belt
NOTE:Use 4"x36" (100mm x 914mm) sanding belt. On the smooth side of the sanding belt,
there is a directional arrow. The sanding belt must run in the direction of the arrow.
FIG 2
F
G D
C
E
B
A
6
5a
5
FIG 3
Bekijk gratis de handleiding van Genesis GBDS430, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Genesis |
| Model | GBDS430 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8422 MB |
