Genesis GBDS430 handleiding
Handleiding
Je bekijkt pagina 10 van 40
English
Belt/Disc Sander
Operator’s Manual GBDS430
ADJUSTMENTS
WARNING: Always be sure that the tool is
switched off and unplugged from the power source
before adjusting, adding accessories, or checking
a function on the tool
.
ADjUSTING THE BELT TRACKING (FIG 9 )
POSITIONING BELT BED (FIG 10)
To Adjust the Belt Bed Position
OPERATION
WARNING: Always be sure that the tool is
switched off and unplugged from the power source
before adjusting, adding accessories, or checking
a function on the tool
.
ON/OFF SWITCH (FIG 11)
WARNING: Always switch off the tool before unplugging it to avoid accidental
starting when re-plugging the tool into a power source.
DUST PORT
BEVEL SANDING (FIG 12)
To set table at bevel position
1. Loosen the table lock knob and tilt the table to the desired angle.
2. Retighten the table lock knob.
FIG 9
11
FIG 10
12
FIG 11
1 1a
Bekijk gratis de handleiding van Genesis GBDS430, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Genesis |
| Model | GBDS430 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8422 MB |
