Genaray PX-MOD-3 handleiding
Handleiding
Je bekijkt pagina 8 van 36
Modular RGB Pixel Panel - USER MANUAL
8
The PX-MOD-3 can be powered directly from
an AC outlet or with two NP-F batteries.
USING AC POWER
Connect the AC power adapter to the
PX-MOD-3 with the included AC adapter and
plug the power cable into an outlet.
To turn on the fixture, flip the power switch
to the DC position (I).
USING THE PX-MOD-3 WITH BATTERY
POWER
The PX-MOD-3 can be powered by two NP-F
batteries.
Important!
Two NP-F batteries must be attached
to the PX-MOD-3 to power the light.
When attaching batteries, make sure the
power switch is in the Off position and the
fixture is not plugged into a wall outlet.
Barndoors control the direction and intensity
of the light’s beam. Use them to narrow or
widen the beam and control light spill.
The PX-MOD-3 comes with the four-way
barndoors attached.
To remove the barndoors, unscrew the four
corner screws and remove the barndoors
from the light.
To replace the barndoors, loosely hand-
thread all four screws before you securely
tighten them with a screwdriver.
POWERING THE
LIGHTBARNDOORS
instructions
Bekijk gratis de handleiding van Genaray PX-MOD-3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Genaray |
| Model | PX-MOD-3 |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 3144 MB |
