Gefen ToolBox GTB-HD4K2K-441 handleiding
Handleiding
Je bekijkt pagina 21 van 98
page | 11
Using the IR Remote Control
The included IR remote control unit can also be used to switch between each input.
The front panel of the 4x1 Switcher for HDMI 4K x 2K has a set of four (4) LED indicators
which are associated with each input on the switcher.
1. When the switcher is powered-on for the rst time, Input 1 (In 1) will automatically
be selected.
2. Point the included IR remote control unit at the IR sensor on the top panel. If an IR
extender is being used, then both IR sensors will be used to receive IR signals.
3. Each button on the IR remote control unit represents an input. Press the desired
button on the IR remote control to switch to that input.
Operating the 4x1 Switcher for HDMI 4K x 2K
Switching Inputs
IR extender
Point IR remote control
unit at the IR sensor
LED indicates a
button was pressed
Bekijk gratis de handleiding van Gefen ToolBox GTB-HD4K2K-441, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Gefen |
| Model | ToolBox GTB-HD4K2K-441 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10626 MB |
