Gefen ToolBox GTB-HD4K2K-441 handleiding
Handleiding
Je bekijkt pagina 16 van 98
page | 6
Installing the Battery
The IR remote control unit ships with two batteries. Only one battery is required for
operation. The second battery is a spare.
1. Remove the back cover the IR Remote Control unit.
2. Insert the included battery into the primary battery slot. The positive (+) side of the
battery should be facing up.
3. Replace the back cover.
Setting the IR Channel
In order for the included IR remote control to communicate with the 4x1 Switcher for HDMI
4K x 2K, the IR remote control must be set to the same channel as the switcher.
Use the #set_ir command to set the IR channel of the switcher.
IR Channel DIP settings
0
(default)
1 2
ON
1
1 2
ON
1 2
2
1 2
ON
3
1 2
ON
Getting Started
IR Remote Control Unit
WARNING: Use only 3V CR2032-type batteries. Risk of explosion
if battery is replaced by an incorrect type. Dispose of used batteries
according to the instructions.
DIP switches
Bekijk gratis de handleiding van Gefen ToolBox GTB-HD4K2K-441, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Gefen |
| Model | ToolBox GTB-HD4K2K-441 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10626 MB |
