Gefen GF-HDK18G-VIP-RX handleiding
Handleiding
Je bekijkt pagina 72 van 134
72
Command Description
#set_vw_osd Enable / disable the video wall OSD
#set_vw_pos Sets the video wall display position
#set_vw_shift Sets the video wall display shift
#set_vw_vscale Displays the video wall vertical up-scaling
Serial
Command Description
#get_serial_allow Displays the Serial-over-IP state
#get_serial_baud Displays the serial baud rate setting
#get_serial_bits Displays the serial data bits setting
#get_serial_parity Displays the serial parity setting
#get_serial_stop Displays the serial stop bits setting
#set_serial_allow Enables or disables Serial-over-IP mode
#set_serial_baud Sets the baud rate for the serial port
#set_serial_bits Sets the data bits for the serial port
#set_serial_parity Sets the parity setting for the serial port
#set_serial_stop Sets the number of stop bits for the serial port
System
Command Description
#get_rmware_version Displays the rmware version
#get_fp_timeout Displays front panel LED/LCM timeout
#get_node_list Displays node list of devices in network
#get_osd_pip Displays OSD source picture-in-picture
#set_fp_timeout Sets front panel LED/LCM timeout
#set_osd_pip Sets OSD source picture-in-picture setting
#factory_reset Resets the unit to factory-default settings
#fw_upgrade Upgrades rmware using external le
#reboot Reboots the unit
Tx Specic
Command Description
#get_block Displays the current video blocking state
#get_hdcp Displays the HDCP state
Command Categories
Bekijk gratis de handleiding van Gefen GF-HDK18G-VIP-RX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Gefen |
| Model | GF-HDK18G-VIP-RX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12456 MB |
