Gefen GF-HDK18G-VIP-RX handleiding
Handleiding
Je bekijkt pagina 69 van 134
69
For information on additional commands, refer to the Gen3 API document.
Command Categories
Important: Commands that are limited to a Sender or Receiver unit are marked as “Tx
only” and “Rx only,” respectively. Unless otherwise noted, commands can be used when
connected to either a Sender or Receiver unit.
CEC
Command Description
#get_auto_cec_off Displays auto CEC OFF status
#get_auto_cec_on Displays auto CEC ON status
#get_cec_enable Displays CEC pass-through enable status
#set_auto_cec_off Sets auto CEC to OFF
#set_auto_cec_on Sets auto CEC to ON
#set_cec_enable Sets CEC pass-through enable
Discovery Service
Command Description
#get_device_desc Displays the device description
#get_discovery Displays the current state of the discovery service
#get_discovery_mode Displays the discovery read/write mode
#get_showme Displays the status of the showme state
#set_device_desc Sets the device description
#set_discovery Enables or disables the discovery service
#set_discovery_mode Sets the discovery mode
#set_showme Enables or disables the “show me” feature
Help
Command Description
#help Displays a list of available commands
IP Bridge
Command Description
#send_cec Sends CEC command to device
#send_ir Sends IR command
#send_serial Sends Serial command
Command Categories
Bekijk gratis de handleiding van Gefen GF-HDK18G-VIP-RX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Gefen |
| Model | GF-HDK18G-VIP-RX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12456 MB |
