Gefen GF-HDK18G-VIP-RX handleiding
Handleiding
Je bekijkt pagina 68 van 134
68
Telnet Access
Note: By default, the Telnet login credentials are disabled. This setting is required when
using the Matrix controller (Gefen part no. GF-AVIP-MC) but can be enabled for security
purposes. Use the #use_telnet_login command to enable or disable this feature.
1. Launch the desired terminal application (e.g., Windows Hyperterminal, etc).
2. Within the terminal program, enter the IP address of the Sender or Receiver unit that
you wish to control.
3. Enter the TCP listening port. The default listening port is 23.
4. After the correct settings have been used in the terminal program, information similar
to the following will be displayed.
In the example below, we are connected to the client (Receiver unit) and Telnet login
has been enabled:
5. Log in as “Administrator.” The default password is “admin”. To change the Telnet
password, see the #set_telnet_pass command.
6. Type #help for a list of commands or refer to the tables on the following pages.
ADVANCED OPERATION
Bekijk gratis de handleiding van Gefen GF-HDK18G-VIP-RX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Gefen |
| Model | GF-HDK18G-VIP-RX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 12456 MB |
